Intelligent Infrared Induction Water Saving Device USB Charging

Overview:
1. Easy Installation: The ordinary faucets can be upgraded to induction faucets by the simple assembly. Two sets of induction areas and two water modes, 0.25 seconds fast induction, smart, convenient and easy to experience.
2. Infrared Sensor Design: Infrared sensor drainage reduces touch pollution. The water can be discharged by sensing without the tediousness of manually turning on and off the faucet manually, and not transferring the stain to the faucet to avoid cross-contamination.
3. USB Charging: 6 sets of adapters can be adapted to any faucet. Using USB charging, the charging time is about 3 hours, which can provide up to 6 hours of battery life. When the battery is low, there will be a light reminder function.
4. Convenient to Use: The bottom sensor meets the short-term water demand. When the sensor enters the bottom sensing area (within a limited distance of 10 cm), water starts to flow out. When the sensor leaves, the water stops flowing out.
5. Side Sensor: The side sensor meets water storage requirements. When the sensor enters the side sensing area (within a limited distance of 5 cm), water begins to flow out. The water discharge time lasts three minutes. Even if the object is left, the water will still flow out. If the sensor enters the side sensing area again during the water flow, the water can be stopped at any time.

Specifications:
Input voltage: AC90~250V
Input frequency: 50/60HZ
Output voltage: AC90~250V
Output power: 900~2500W
Rated voltage: 110V~125V
Rated power: 1250W
Maximum load current: 10 A
Wi-fi standard: 802.11 b/g/n
Weight: 0.1000 kg
Size: 5.80 x 3.30 x 4.80 cm / 2.28 x 1.3 x 1.89 inches

Package Contents:
1 x English manual, 1 x Socket

Note: China–UAE air freight is currently disrupted per product page notice at time of extraction.